看看屋手机版,二宫光的推特New Product
HOME > New Product
< back |
Push-in fitting made of SUS316 with excellent corrosion resistance.
Push-in fitting SUS316
2020/11
2020/11/13

- Newly introducing Lock-claws type Push-in fitting made of SUS316.
Lock-claws, same as Standard tube fitting, are adopted.
High reliability and excellent operability are realized. - Excellent corrosivity.
Metal material : SUS316. Rubber material : FKM - Realized Down-sizing. (Compared with Pisco's conventional product (collet type))
Straight type : Approx. 17% down sized by volume ratio.
Elbow type : Approx. 20% down sized by volume ratio. - Clean-room packaging is available (Optional)
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement.
Speed controller Push-lock type with Indicator
2020/10
2020/10/30

-
Reducing the task of initial flow settings or their maintenance / replacement.
- Flow rate can be set with indicator.
The scales are on the side and the top.
Side scales indicate every 1/2 turn. - Flow rate is proportional to the knob turns. 2 types for different flow range are available.
- Compact and low profile body.
The industry's smallest and low profile as a speed controller with indicator. - Push-lock type knob. Easy to handle.
Flow rate can be set by 30 steps in one turn. - Easy to identify the flow direction by the knob color.
- The material of the diaphragm is HNBR.
Easily fix tubes and cables stored in Plarailchain.
Accessories for Plarailchain Cable Clamp Plate & Dividing Sheet
2020/09
2020/09/04

-
Reduce drawn-in or protruded cables and tubes which may cause wear and tear.
- 7 types, from 4 to 10 comb-teeth, are available according to Plarailchain width.
- By using spacers, cables and tubes can be organized into double tier.
- Plate with dividing sheet is available, too.
- Convenient to organize cables and tubes into double tier.
- Reduce wear between cables and tubes.
- Can be ordered with preferable length in 5 mm.
●Cable Clamp Plate
●Dividing Sheet
Best suitable for large flow air distribution piping.
Main Block Large Thread Type
2020/09
2020/09/04

- Thread size R3/4 and R1 are added to Air inlet port parts "Bush A" (MBA).
- Light weight and can be used under low ozone concentration environment.
Metal parts material:Aluminum, Rubber parts material:HNBR - Best suitable for large flow vacuum piping.
Can be connected to Vacuum Generator VLM and Large Capacity Vacuum Filter. - Connectable to conventional Main Block.
"Bush B (MBB)", Thread adopter for assembly, is available.
Bush B can convert M30 x 1.5 of Large therad size Main Block to M18 x 1 to connect with conventional Main Block.
Adopted New PFA.
High purity Fluororesin Tube
2020/05
2020/05/01

- Adopted New PFA with high purity.
High purity with less elution of impurities such as metal ion, eluted ion and Total Organic Carbon (TOC), compared with PFA. - Excellent in "Chemical resistance", "Heat resistance" and "Weather resistance", suitable for various industries.
- Excellent in Internal smoothness.
With its excellent internal smoothness, it contributes to less particle / chemical liquid stagnation and saves washing time. - Best match with Pisco's Fluororesin Fittings.
- Cleanroom packaging is available.
Packed in ISO class 6 equivalent.
New color variations are added to Fluororesin (FEP) tube with excellent chemical resistance.
Fluororesin (FEP) Tube with new color variations
2020/05
2020/05/01

- Clear red, Clear blue, Clear yellow are newly added to conventional color variations; Clear and Black. Easier identification in pinping.
- Excellent in "Chemical resistance", "Heat resistance" and "Weather resistance", suitable for various industries.
- Fluid inside the clear color tube is visible.
※) Not possible with Black color tube. - Cleanroom packaging is available.
New color variations are added to Fluororesin (PFA) tube with excellent chemical resistance.
Fluororesin (PFA) Tube with new color variations
2020/05
2020/05/01

- Clear red, Clear blue, Clear yellow are newly added to conventional color variations; Clear and Black. Easier identification in pinping.
- Excellent in "Chemical resistance", "Heat resistance" and "Weather resistance", suitable for various industries.
- Fluid inside the clear color tube is visible.
※) Not possible with Black color tube. - Cleanroom packaging is available.
High precision. Can be used either for inside / outside gripping.
Small sized parallel gripper, Multi-acting type
2019/09
2019/09/03

- High precision.
Repeatability:±0.01mm。 - Various gripping styles with one gripper.
Can be used either for inside or outside gripping. Can be used either as air gripper or spring gripper. - Uniquely designed roller guide system.
The longer distance between rollers enables smooth movement and gripping.
Realized high regidity, high durability, high gripping force and long life time. - Extra thin body with 4mm stroke.
A 10mm width body which incorporates 8mm bore cylinder enables high gripping force. Ideal for narrow pitch/multi-station use. - Short body with 6mm stroke.
Wide stroke type enable making an equipment compact. - Super light weight with 8mm stroke.
About 1/2 of the weight of the conventional grippers of the same class and model. - Either the center port or the side port can be used as the air supply port.
- Avoidinig mis-placement of the fingers (attachments).
A centering slot is cut on the fingers. - Attachments are provided (sold separately).
- Sensor switches are provided (sold separately).
High precision. Can be used either for inside / outside gripping.
Small sized parallel gripper, Single-acting type
2019/09
2019/09/03

- High precision.
Repeatability:±0.01mm。 - Various gripping styles with one gripper.
Can be used either for inside or outside gripping. Can be used either as air gripper or spring gripper. - Uniquely designed roller guide system.
The longer distance between rollers enables smooth movement and gripping.
Realized high regidity, high durability, high gripping force and long life time. - Miniature body but wide stroke.
The smallest body as a 6mm stroke type in the industry. (Internal investigation) - 10mm width model is the lightest in the industry.
A small gripper with secure gripping. - Single acting gripper yet can be used either Normally Open or Normally Closed, which was impossible with conventional model.
- Environment friendly eco design.
Single acting, not requiring air supply for the cyclinder retraction, saves air consumption. - Contributes to space-saving of equipment.
Single acting, not requiring piping for the cylinder retraction, enables compact handling. - Avoidinig mis-placement of the fingers (attachments).
A centering slot is cut on the fingers. - Attachments are provided (sold separately).
Vacuum pad for bag-like article converyance
Vacuum pad for packaging bag
2018/06
2019/06/24

- Realizes followability to work-piece and posture stabilization during conveyance.
Soft material is used for the lip part, and hard material for the bellows part. - Two selections for rubber hardness of the lip part.
Soft material (Lip color : Blue) for packaging bag made of thick vinyl sheet.
Ultra soft material (Lip color : Pink) for liquid packaging bag. - Two selections for bellows layers.
5 layers of bellows absorb the shock when contacting a work-piece and follow the inclined surface.
3 layers of bellows are shorter than 5 layers and contribute the posture stability of a work-piece in high speed conveyance. - For work-piece contacting parts, Food Safe Act. (Japan) complied and FDA equivalent materials (*) are used.
※This product is not FDA certificated.
Flow rate : 360L/min[ANR]. Vacuum filter for large flow vacuum generators and vacuum pumps.
Large Flow Vacuum Filter
2018/07
2018/07/13

- Flow rate : 360L/min[ANR]. ※ Large capacity enables to secure large processing flow rate.
The filter removes dust particles sucked with air, and protects a vacuum generator or vacuum pump.
※Processing flow rate with the conditions under filtration accuracy : 5μm and pressure loss : 3kPa of a representative filter.- Four types of filtration accuracy can be selected according to applications.
Filtration accuracy : 1μm, 5μm, 10μm, 200μm - Various types of connections
Taper pipe female thread, Parallel pipe female thread and Push-in fitting are available. - Resin body realized light weight.
- Four types of filtration accuracy can be selected according to applications.
You can save cost up to 30%, compared with the conventional Tube Fitting PP series.
Tube Fitting PP series SUS303 like Corrosivity type is added.
2018/07
2018/07/02

- Adopting special stainless steel (or SUS303) for metal material. You can save the cost up to 30%, compared with the conventional Tube fitting PP series.
※Corrosivity level of the special stainless steel is equivalent to SUS303.- PP, suitable for clean environment, for main body material. EPDM for sealing material.
- Thread material is selectable from PP resin and special stainless steel (or SUS303).
- No exposure of metal on liquid contact parts. (Thread type : PP only)
Stainless steel valve suitable to use with chemical and mixed gass.
Stainless Steel Ball Valve
2018/01
2019/07/31

- SUS316 equivalent material (SUS316 or CF8M) for fluid contact part.
- Stem for fixing the handle will not come off the valve body.
Prevent stem come-off from valve body. - No restriction for flow direction.
IN/OUT flow can be connected to both side of valve. - Cleaning Specification.
Suitable for chemical liquid piping in semiconductor manufacturing process.
Fluororesin equipment
2019/11
2019/11/29

- High pull-out strength and sealability are realized.
- Made of PFA and PTFE with high chemical and heat resistance.
- Clean washing + clean packaging
- Fitting and Needle valve for flow adjustment are available.
- NOW available for US market from Dec. 2019!
Securing high vacuum of -94kPa, and large suction flow rate of Max. 1,110ℓ/min[ANR].
Large Flow Vacuum Generator VLM
2017/10
2017/10/13

- Multi stage nozzle ejector with multi layer structure.
- Securing high vacuum and large flow rate.
By adoption of multi-stage nozzle and multi layer structure, suction flow can be secured approx. 2.2times (on average) larger than air consumption.. - Excellent in ozone resistance. FKM for all sealing rubber.
- Suitable for various industrial fields that require large flow rate.
Large flow type of 2-stage Speed Controller is launched.
New line up for 2-stage Speed Controller.
2017/10
2017/09/28

- Realizes the 2-stage control of cylinder speed by the operations of three needles.
- Tube size: ø10mm was newly added.
- Large flow type of tube size : ø4, ø6 and ø8mm were newly added.
Enables to ensure larger flow rate with same tube size as conventional type.
It prevents unnecessary manual adjustments during the operations.
Slot-head Speed Controller
2016/11
2016/12/19

- Use a slot screwdriver to adjust the needle.
- Approx. 2/3 height of the conventional speed controller.*
Suitable for a small space. *Compared to the max. height of the conventional speed controller. - 2 types(Elbow and Free type) are available. Free direction for piping.
Industry's First! (Patent no. 5578502). The function of a shock absorber is built in a speed controller.
2-stage Speed Controller is introduced
2015/03
2017/02/14

- Inch tube sizes, 5/32", 1/4", and 5/16" are introduced.
- Shock absorber, cylinder mounting type, is not necessary.
Two-stage exhaust flow rate adjustment is realized. By using 2nd stage exhaust speed to be as cushion (brake), controlling like a shock absorber is possible. - Shock absorbing (cushion) property (EX2) is adjustable.
Speed control (EX1), shock absorbing (cushion) strength (EX2), and start timing of shock absorber (TIM) are separately adjustable. - Durability is about 3 times of a shock absorber.
Durability of BJSU is more than 3 times of a normal cylinder mounting type shock absorber. Thus, reducing the cost and the frequency of the maintenace are possible in long-run operation.
Peeling only the flame retardant cover of PISCO FB tube like sharpening a pencil.
Antispatter Tube Cover Peeler
2014/12
2014/12/09

- Peeling only the flame retardant cover appropriate for the tube inserting length of Pisco's anti-spatter products.
- No damage to the inner tube.
- The transparent body enables to check cutting progress easily.
Reducing the fluctuations and pulsations of compressed air and vacuum.
Air Tank is introduced.
2014/11
2015/09/26

- Tank capacity is selectable from 6 variations.
0.4L, 0.75L, 2L, 5L, 10L, 20L - The tank is made of stainless steel.
・Tank of 0.4~10 liters capacity: SUS304 equivalent.
・Tank of 20 liters capacity: SUS321 equivalent. - Corresponding to RoHS directive.
- IMPORTANT: This tank does not have any construction code for pressure vessels outside of Japan, therefore it may not meet your local regulation, please check your local regulation first before ordering if a certificate is the requirement for importing.
Multi-stage nozzle vacuum generator ensuring high vacuum pressure and high vacuum flow by low 0.35MPa air supply.
Vacuum Generator VVV
2014/11
2014/12/09

- Vacuum port is distributed into 3 ports.
- Not only suction transport application but vacuum packing, defoaming, or deaeration application is also recommended.
Best suitable for a large & heavy workpiece in industries such as packaging or automobile, or suitable for an air-permeable workpiece. - Easy maintenance and long life.
Fixed orifice push-in fitting. Orifice bore ø0.1㎜ & ø0.2 ㎜ are added.
Fixed Orifice Joint series, Standard type & Mini type
2013/11
2014/01/28

-
Orifice bore: Min, ø0.1 to max. ø2.0 mm.
The size can be selected by 0.1mm increment. -
Fixed Orifice Joint series can be installed in a small space.
M5 thread type (only for mini type) is newly launched. Responding to compact piping. - Compared to needle valves, reasonable price.
A solution to your complicated piping ! Color cap new types are released.
Color Cap New Types
2013/10
2014/01/28

- Color cap new types can fit on push-in fittings whose release rings sit next to next such as union Y types (PY types), which is not achieved by conventional color caps.
- 10 color variation
- Same color combination of a color cap and a tube helps easy piping.
Inch size is newly released! Tube Fitting PP type which is best suitable for clean environment.
Tube Fitting PP type in Inch tube size
2013/10
2014/01/28

- Body material is made of PP resin which is suitable for clean environment.
-
Clear (semitransparent) resin body, fluid (liquid) flow can be checked visually.
Hygienic condition can be easily checked. - Oil-free specification which enable to meet variety of needs.
-
Variety of materials and specifications
・Thread materials : PP resin or SUS 304
・Rubber part materials : Standard spec. is EPDM. Options are FKM, HNBR and NBR
・Packaging spec. : Standard packaging spec, Clean-room packaging spec. in which a product is washed by clean air
and packaged in a clean-room corresponding to ISO class 6, and Clean-wash spec. in which a product goes through
vacuum ultrasonic cleaning by HFE(hydro fluoro ether) in a clean-room and is packaged with deaeration packaging
Easily viewable 2-line LCD screen. 30 mm square sensor of high visibile 3-color display.
Large digital display pressure sensor 31 series
2013/09
2016/11/08

- 2-Color display depending on output.
Main display : Pressure value (Red or green)
Sub-display : Set point (Orange) - Compact body.
Body size is width 30 mm and height 30 mm - Locking mechanism is built in.
Locking mechanism prevents accidental output when pressing the key mistakenly. - Excellent cost performance.
Over 40% of cost cut was realized compared to Large digital pressure sensor 30 series. - Built in power saving mode reduces power consumption by 30%.
Unless any button is pushed at power saving mode, the main display enters power saving mode in 30 seconds. - Rich option parts
Wall bracket, Upright bracket, Panel adapter set
With digital indication of pressure, easy to check.
Digital Pressure Gauge
2013/09
2014/01/28

-
Compact body
Compact body of 30mm width and 30mm height -
Dust and water proof: IP65
By installing a tube on air release port on back, IP65 can be maintained. -
A power saving mode is available. Battery life: about 3 years.
One push to indicate pressure value. The expected battery life is when pressure displayed at 5 times a day basis. -
Visible indication of battery change timing
Low battery is notified by blinking battery icon. -
Rich option parts
Wall bracket, upright bracket, and panel adapter set
Respond to high-speed drive cylinder.
Light & compact design φ3mm type (Eco-friendly) is added.
Quick Exhaust Valve EQ Mini type
2013/09
2014/01/28

-
Downsizing of tube diameter from φ4mm→φ3mm enables to reduce air consumption by 90,000 litters per year !
●By only piping → 36% reduction! ●Including cylinder → 10% reduction!
※Cylinder condition: Cylinder bore:φ20mm, Stroke:100mm, Double-acting single rod
Annual operation: 2,160,000 times, Pressure: 0.5MPa (with pipe length: 2m) -
Redesign of conventional 2 types!
EQE type and EQY type are redesigned. Stick-out silencer on EQE type, which caused a problem when connecting a tube, was resolved and smooth tubing is realized. -
Cylinder direct-mount type is newly released!
Exhaust needle-valve type and female thread type are available. Female thread type can be arranged to either exhaust to air type or tube exhaust type depending on the connecting devices so that it can meet to wide range of applications.
Parallel quadruple layout pump
Rotary Vacuum Pump/RPV064
2013/05
2015/04/09

- Parallel quadruple layout pump (Low vacuum 120 litters type) is newly released!
High efficiency ! Suitable for wide uses such as defoaming, deaeration, vacuum packing, and vacuum transportation.
Rotary Vacuum Pump / PRV06
2013/05
2014/01/28

-
Corresponding to save energy
Rotary Vacuum Pump achieved market leading high efficiency in pumping speed at motor rated power 1(w)
⇒1.0/1.2[Pumping speed (L/min)/Motor rated power(W)](50/60Hz) -
Light and Compact
Saving space is realized by the special rotor shape. -
Low heat generation
Low heat generation is realized by forced-air cooling system.
Because of installation of magnet coupling, no sliding and moving of rotary shaft seal are occurred. Besides, no heat is generated by the seal.
Highly-efficient rotary motor suppresses motor part heating -
Low operating noise & Low vibration
With thoroughly considered balance design of the rotating part, low operating noise and low oscillation are realized. -
Long service life
By using super engineering plastic which is superior in self-lubricating and abrasion resistance and special surface treatment, excellent durability is completed.
With a steady imperceptible clearance between rotor and cylinder, contactless structure and minimization of sliding section are achieved.
With adoption of magnet coupling, no slide seal is necessary.
・No maintenance is necessary for seal abrasion.
・Minimized load on motor shaft supports motor's long service life. -
Low operating noise and Low vibration
With thoroughly considered balance design of motor part, low operating noise and low oscillation are realized. -
Low dust emission
Clean grease for vacuum with excellent superiority in low dust emission and low volatility is used. No lubrication is necessary.
Minimization sliding portion enables low dust emission.
・This rotary vacuum pump suppresses contamination of environment by wear debris as vane pump causes. -
Environmentally safe and Safety design
RoHS conforming & CE Marking conforming -
Wide variety in option
Various options are available for not only pump unit, but quick fitting and exhaust cleaner (exhaust silencer).
Anti-static models are newly introduced! Best suitable for miniature parts assembly.
Anti-static Air Pincette Series
看看屋手机版,二宫光的推特
2013/04
2014/01/30

-
It is the best for the small part assembly under the environment where static electricity is disliked.
Surface resistance: 104~108Ω -
A vacuum pad and a vacuum generator are built in a pen like body.
By connecting a 4mm OD tube and supplying 0.5MPa compressed air, it generates vacuum by closing a hole or pushing a button to suck up a small work. -
2 types are available.
Built-in push valve VTB type, which passes air only in use for saving air consumption and low noise, and no push valve VTA type.
< back |